rename: study -> qemu

2025-12-30 08:33:13 +00:00
parent 33c5e8bfb6
commit cf722d75ff
11 changed files with 0 additions and 0 deletions
@@ -0,0 +1,123 @@
+; mybios.asm
+[BITS 16]
+[ORG 0]
+
+bios_start:
+    ; 1. 세그먼트 초기화 (CS=0xF000 이므로 DS, ES도 맞춤)
+    mov ax, 0xF000
+    mov ds, ax
+    mov es, ax
+    
+    ; mov ss, ax
+    ; mov sp, 0xFFF0
+    xor ax, ax      ; AX = 0
+    mov ss, ax      ; SS = 0x0000 (RAM)
+    mov sp, 0xFFFE  ; 0x0000 ~ 0xFFFF 영역 중 가장 끝!
+    ; mov sp, 0x7C00  ; SP = 0x7C00 (부트로더가 쓰는 안전한 RAM 공간)
+
+    ; 2. 시리얼 포트(COM1) 초기화 (필수!)
+    mov dx, 0x3FB   ; Line Control Register
+    mov al, 0x80    ; DLAB bit set
+    out dx, al
+
+    mov dx, 0x3F8   ; Divisor (Low) - 9600 baud
+    mov al, 0x0C
+    out dx, al
+
+    mov dx, 0x3F9   ; Divisor (High)
+    mov al, 0x00
+    out dx, al
+
+    mov dx, 0x3FB   ; LCR: 8 bits, no parity, 1 stop bit
+    mov al, 0x03
+    out dx, al
+
+    ; 3. 메시지 출력
+    mov si, msg_bios
+    call print_serial
+
+    ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+    ; ===========================================================
+    ; [ACPI Shutdown Sequence for QEMU PIIX4 Chipset]
+    ; Target: Bus 0, Device 1, Function 3 (Power Management)
+    ; Address Format: 1(En) | Bus(0) | Dev(1) | Func(3) | Reg
+    ; Hex Prefix:     0x80  | 00     | 08     | 03      | ..
+    ; Combined:       0x80000B.. (Function 3 is the key)
+    ; ===========================================================
+
+    ; Step 0: Enable I/O Access (Command Register - 0x04)
+    ; We must tell the chipset to allow I/O port access first.
+    mov dx, 0xCF8
+    mov eax, 0x80000B04     ; Address: Func 3, Reg 0x04
+    out dx, eax
+    
+    mov dx, 0xCFC
+    mov eax, 0x0001         ; Value: Bit 0 (I/O Space Enable)
+    out dx, eax
+
+    ; Step 1: Set ACPI Base Address (PMBA - 0x40)
+    ; We map the ACPI registers to I/O port 0xB000.
+    mov dx, 0xCF8
+    mov eax, 0x80000B40     ; Address: Func 3, Reg 0x40
+    out dx, eax
+    
+    mov dx, 0xCFC
+    mov eax, 0x0000B001     ; Value: Base 0xB000 | Bit 0 (Hardwired to 1)
+    out dx, eax
+
+    ; Step 2: Enable ACPI Function (PMREGMISC - 0x80)
+    mov dx, 0xCF8
+    mov eax, 0x80000B80     ; Address: Func 3, Reg 0x80
+    out dx, eax
+    
+    mov dx, 0xCFC
+    mov eax, 0x00000001     ; Value: Bit 0 (ACPI Enable)
+    out dx, eax
+    ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+    mov si, msg_off
+    call print_serial
+    
+    ; ; Exit with return value 0
+    mov dx, 0xB004
+    mov ax, 0x2000          ; SLP_TYP(Soft Off) | SLP_EN
+    out dx, ax
+
+    ; ; reboot
+    ; mov dx, 0x64
+    ; mov al, 0xFE
+    ; out dx, al
+
+    ; ; exit (isa-debug-exit; need '-device isa-debug-exit,iobase=0x501,iosize=0x04')
+    ; mov dx, 0x501
+    ; mov al, 0x02    ; exit code (2) -> qemu exits with exit code (al<<1)|1
+    ; out dx, al
+    
+    ; 그래도 안 꺼지면 그냥 멈춰라
+    cli
+    hlt
+    jmp $
+
+; --- 시리얼 출력 함수 ---
+print_serial:
+    mov dx, 0x3F8       ; COM1 데이터 포트
+.loop:
+    lodsb               ; [DS:SI] -> AL
+    cmp al, 0
+    je .done
+    out dx, al          ; 한 글자 전송
+    jmp .loop
+.done:
+    ret
+
+; msg_bios  db "Hello! This is a CUSTOM BIOS running on QEMU!", 0x0D, 0x0A, 0
+msg_bios  db "Hello! This is a CUSTOM BIOS running on QEMU!", 0x0D, 0x0A, 0
+msg_off   db "ACPI Enabled. Powering Off NOW!", 0x0D, 0x0A, 0
+
+
+; Padding
+times 65520-($-$$) db 0 
+
+reset_vector:
+    jmp 0xF000:0x0000   
+    times 16-($-reset_vector) db 0